LiitoKala Lii-S1 - универсальное одноканальное зарядное устройство для Ni-Mh, Ni-Cd, Li-Ion и LiFePO4 аккумуляторов с цифровым LED дисплеем и выбором тока заряда. Отличается от похожей модели Lii-100 наличием цифрового дисплея и отсутствием функции PowerBank.
- Не поддерживает (не влазят) размер 20700/21700 (и без платы защиты тоже)!!!
- Есть функция автополярности т.е. аккумулятор можно засовывать без розыска где + и -
Technology once again innovation, Auto-polarity detection. Do not need to distinguish the battery polarity. As long as the battery is rechargeable battery that can be charged. Do not worry about battery polarity reverse.Good Charger.
In addition to Auto-polarity detection there is a strong visible digi-dispaly. Visually beautiful. Function continues the Lii-100, very good.
Спецификация
Input: Micro USB DC 5V/1A (min.)
Output voltage: DC 4.2V 500mA/1000mA for Li-Ion
DC 4.35V 500mA/1000mA for IMR
DC 3.65V 500mA/1000mA for LeFePO4
DC 1.48V 500mA/1000mA for NiMH / NI-Cd
Constant voltage charging with cut-off current less then 100mA
Standby current: No more than 15mA
Вес: 45 grams (charger) + 17grams (USB cable)
Размер, LxWxH: 112x37x32 mm
Compatible for Batteries
Li-ion / IMR / LiFePO4: 26650, 21700,20700, 18650, 18490, 17700, 17500, 16340 (RCR123), 14500, 10440
Ni-MH / Cd: AA, AAA, A, SC, C size
Features
1. One-slot charging and management system, Micro USB DC 5V input port
2. Battery polarity auto-detection (Any Polarity)
3. 500mAh / 1000mAh charging current for selection
4. Built-in digital tube indicator shows the real-time charging status of voltage and current
5. Identify Li-ion and Ni-MH battery automatically
Select manually by short-press the mode button for IMR battery (3.85V Li-ion) and LiFePO4 battery (3.2V)
6. Activation function for 0V battery of PCM protection.
7. Can not charge battery with 0.0 ≦ U <0.2V for NiMH / Cd and 1.6 ≦ U <2.2V for Li-Ion
8. Over-charging and over-discharge protection
9. Identify broken / defective battery
10. Charging under constant voltage and current
Инструкция (Operation instruction)
- There's a 'MODE' button for choosing the battery types and charging current
- Long press the 'MODE' button for 3 seconds to change the charging current, you can change the charging current at any time
- Short press the 'MODE' button to change the charging types of lithium batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for 3.85V li-ion and 3.2V LiFePO4 battery
It begins to charge the battery 5 seconds after your settings
When the battery is inserted or defective battery is inserted, the charger will have no any response showing "null" ; When the battery is fully charged, it shows "Full"
It can display the battery voltage and charge current by short press the 'MODE' button at any time during charging
Подходит для моделей аккумуляторов: Ni-Mh,Ni-Cd,Li-Ion (4.2),Li-ion (4.35),LiFePO4 (3.6)
Поддерживаемые размеры: AA,AAA,AAAA,C,До 26650
Тип: Микропроцессорный
Количество независимых каналов: 1
Дисплей: LED
Подсветка дисплея: Нет
Выбор тока заряда: Да
Максимальный ток заряда: 1000
Суммарный ток заряда, мА: 1000
Минимальный ток заряда: 500
Функция разряд: Нет
Тест емкости: Нет
Определение вн. сопротивления: Нет
Функция Powerbank: Нет
Функция восстановления: Нет
Страна регистрации бренда: Китай
