Інтелектуальне багатофункціональний зарядний пристрій Liitokala Lii-600 з сенсорним LCD дисплеєм, функціями CHARGE, DISCHARGE and TEST, REPAIR (Заряд/Розряд/Тест/Відновлення), налаштованим струмом зарядка або автоматичним настроюванням струму заряду в залежності від внутрішнього опору батареї, з струмом заряду до 3A/канал.
Liitokala-600 - це наступна модель еволюції зарядного пристрою Lii-500 і Lii-500s
Основні відмінності від попередніх моделей:
1. The function of automatically distributing the charging current (distributing the charging current according to the internal resistance of the test battery), or it can be set manually.
2. Чіткий LCD дисплей
3. Можна встановити 4шт 21700 або 26650 батарей одночасно
4. Максимальний струм розряду 750mA (Lii-500 був 500mA)
5. Немає USB
Main Features:
- Brand new touch control function;
- Four slots work independently;
- It has two working modes: automatic AUTO and manual MANUAL; (the system default is automatic AUTO, automatic current distribution);
- A variety of optional charging currents: 250mA /500mA/1000mA /1500mA/2000mA/2500mA/3000mA;
- Three levels of discharge current: 250mA/500mA/750mA;
- It can charge different specifications (18650/26650/AA/AAA) rechargeable batteries at the same time;
- This product uses a single screen independent LCD display, including battery type (Li-ion-3.7 V, Ni-MH1.2V), working mode (AUTO automatic/MANUAL manual), battery channel (CH1-CH4), working mode (CHARGE charge mode/DISCHARGE discharge mode/TEST detection mode/REPAIR repair mode), charge and discharge capacity (mAh), charge and discharge time (h), charge and discharge current (mA), battery voltage (V), battery power percentage%, The battery internal resistance (mΩ), temperature ºC and other parameters are detailed and clear at a glance;
- In CHARGE mode, 4 channels work independently, each channel can select different charging current detect and charging capacity;
- In DISCHARGE mode, 4 channels work independently, each channel can choose different discharge current and detect discharge capacity;
- TEST mode, the normal battery capacity detection process includes three steps (1 charge, 2 discharge, 3 recharge) to check the battery capacity process;
- Different channels can work in different modes (CHARGE, DISCHARGE and TEST, REPAIR four modes); independently set charge/discharge capacity detection/normal capacity detection functions;
- Multiple protection functions: overcharge and overdischarge, short circuit, temperature, 0V voltage activation function (-ΔV&0ΔV), 1.65 V-2.2 V can not charge function, intelligent identification of bad batteries and reverse battery detection protection.
Touch Point:
The charger has 6 touch contact points, the mode selection point (MODE), the current size selection point (CURRENT), the independent selection and data view point key (1234), the 6 touch mode keys also light up the LCD backlight function, use Concise and convenient;
1. MODE: (selection mode) including CHARGE charging mode, DISCHARGE discharging mode, TEST capacity detection mode and REPAIR repair mode;
2. CURRENT: (short-touch current selection) including 250mA/500mA/1000mA/1500mA/2000mA/2500mA/3000mA; long-touch "CHARGE" point, you can choose automatic AUTO manual work or manual;
3. 1/2/3/4 channel touch points: (corresponding to 1/2/3/4 channels respectively); short touch can independently select and view the corresponding channel data, long touch any point can control the LCD screen display (constant bright or Extinguished);
4. In any case, touch and hold the MODE point "beep" after the prompt sound, you can change CHARGE (charge) mode, DISCHARGE (discharge) mode, TEST (capacity detection) mode, REPAIR (repair) mode, and then light it within 8 seconds. Touch the corresponding function point touch to change the mode, current size, independent, mixed charging, capacity detection function, 8 seconds after selection, it will enter the working state in the working state, you can touch the (1/2/3/4) touch point to view Corresponding channel conditions, including battery type/charging mode/charging capacity (mAh)/charging time (h)/charging current (mA)/battery voltage (V)/power percentage%/battery internal resistance (mΩ)/temperature ℃, etc. Parameter, "End" will be displayed at the end, this work process is over.
Parameters:
DC input voltage: 12.0 V/5.0 A
Ni-MH battery charging current: 1.48 V 250mA/500mA/1000mA*4
Lithium battery charging current: 4.20V250mA /500mA/1000mA /1500mA/2000mA/2500mA/3000mA*4
Rechargeable battery specifications: 18650, 26650, 14500, AA, AAA, etc.
Discharge current: 250mA*4/500mA*4/750mA*4
Termination method: Intelligent voltage monitoring
Specification:
Материал: ABS, PC (ABS пластик, поликарбонат)
Поддерживаемая электрохимия: LiIon, NiMh
Входное напряжение: 12V/5A
Lithium battery charging current: 4.20V 250/500/1000/1500/2000/2500/3000mA *4
NI-MH charging current: 1.48V 250/500/1000mA *4
Discharging current: 250/500/750mA *4
Размер устройства(LWH): 165x115x40mm
Размер упаковки(LWH): 17x12x50mm
Вес устройства: 770г
Вес с упаковкой: 800г
Комплектация:
- Зарядное устройство
- Блок питания 220V->12V/5A
- Инструкция
Входное питание: От сети,Авто 12V
Поддерживаемые типы: Ni-Mh,Ni-Cd,Li-Ion (4.2),Li-ion (4.35),LiFePO4 (3.6)
Поддерживаемые размеры: AA,AAA,AAAA,C,D,До 22650,До 26650,До 32650,21700+IC
Тип: Микропроцессорный
Количество элементов: 4
Количество независимых каналов: 4
Дисплей: LCD
Подсветка дисплея: Да
Выбор тока заряда: Да
Максимальный ток заряда: 3A
Суммарный ток заряда: 12
Минимальный ток заряда: 0.25
Функция разряд: Да
Тест емкости: Да
Определение вн. сопротивления: Нет
Функция Powerbank: Нет
Функция восстановления: Да
Аккумуляторы в комплекте: Нет
Вид: Универсальные
Сумісність: AA,AAA,C,D,SC (Sub-C),АААА,16340 (CR123),16340 (CR123A),10430,10440,14500,14650,16500,17335,17500,17650 17670,18350,18490,18500,18650,18700,20700,21700,22650,25500,26500,26650,32650
Теги: для Li-ion акумуляторів,від прикурювача,для пальчикових акумуляторів,з індикаторами зарядки,захист від перезаряду,з дисплеєм,з захистом від перегріву
